Ranchers.net Bull Session

What moisture do you bale at?

Things that come up in the daily operation of a ranch.
User avatar
Big Muddy rancher
Rancher
Rancher
Posts: 21495
Joined: Thu Feb 10, 2005 6:29 pm
Location: Big Muddy valley
Contact:

What moisture do you bale at?

Postby Big Muddy rancher » Wed Jul 06, 2016 5:18 pm

Just got started for the year. The monitor is reading 16% and down with only the rare occurance hitting 17 or18.

Today we were baling 16 to 13% then we came around a corner and the rake started picking up what was cut yesterday and the monitor started showing 20,21 ,22 then WET. I pulled out and wrapped a 30 incher.
Avatar by Haymaker

I can't tame wild women.

But I can make tame women wild.

User avatar
Soapweed
Rancher
Rancher
Posts: 16156
Joined: Fri Feb 11, 2005 7:54 pm
Location: northern Nebraska Sandhills

Re: What moisture do you bale at?

Postby Soapweed » Wed Jul 06, 2016 5:27 pm

I have always just used the touch feely method, but usually it works. My rule of thumb is that it's better to bale two days too dry than two hours too wet. It's worked for a lot of years, and the cows always seem to eat what we give them. This is not the answer you are looking for, but old traditions die hard. :cowboy:

User avatar
Mike
Rancher
Rancher
Posts: 28510
Joined: Thu Feb 10, 2005 4:05 pm
Location: Montgomery, Al

Re: What moisture do you bale at?

Postby Mike » Wed Jul 06, 2016 5:38 pm

We shoot for 20% or less. 15% - 18% seems to be perfect. Above 20, it tends to heat up to above 150 F degrees.
I'd rather have a bottle in front of me than a frontal lobotomy.

Traveler
Rancher
Rancher
Posts: 4585
Joined: Thu Apr 05, 2007 1:21 pm

Re: What moisture do you bale at?

Postby Traveler » Wed Jul 06, 2016 6:59 pm

Sometimes push the limits on alfalfa, put it up fairly damp before sunup after it's already cured, and stop when too many leaves are falling off around midday. Grass and forage crops, mid teens or less.

User avatar
Silver
Rancher
Rancher
Posts: 5102
Joined: Wed Mar 23, 2005 9:51 pm
Location: BC

Re: What moisture do you bale at?

Postby Silver » Wed Jul 06, 2016 10:07 pm

I try to keep the majority of the readings at 15% or better, but will push it upwards a bit in a pinch. One thing I learned with our Vermeer is that if the monitor claims it is very dry, it probably is. However, if it starts to read a little above that it will be too wet. Like a lot too wet. I assume that is because the baler monitor is reading the outside of the swath which is making contact with the sensors and the inside of the swath may be far less ready to be baled. Bottom line is never trust the baler monitor, but use it for a bit of a guideline.

User avatar
Big Muddy rancher
Rancher
Rancher
Posts: 21495
Joined: Thu Feb 10, 2005 6:29 pm
Location: Big Muddy valley
Contact:

Re: What moisture do you bale at?

Postby Big Muddy rancher » Thu Jul 07, 2016 10:50 am

Lots of variables, yesterday the hay I was baling was mown hay and I was 100 ft behind the rake. I think the moisture was pretty well represented of all the hay. Yes, heavy windrows that dry on top and are wet green underneath pose quite a different story.
Hay that has cured and got wet is quite different than hay that is still curing down.
We usually wait up nights for a dew to bale this year were hoping for the sun to come out in the afternoon so we can bale.
Avatar by Haymaker



I can't tame wild women.



But I can make tame women wild.

User avatar
Hereford76
Rancher
Rancher
Posts: 1162
Joined: Tue Dec 13, 2005 3:49 pm
Location: North Central Montana
Contact:

Re: What moisture do you bale at?

Postby Hereford76 » Thu Jul 07, 2016 8:21 pm

Best hay I ever put up was plumb cured... Started at first breath night air and got a quick thunders however that dumped probably .05. Had drove 40 miles cross country to get job done... only 120 bales or so left to make so I just baled it. Probe said 36 moisture but it was beautiful alfalfa hay.

User avatar
Aaron
Member
Member
Posts: 625
Joined: Thu Feb 10, 2005 4:20 pm
Location: Stratton, Ontario

Re: What moisture do you bale at?

Postby Aaron » Mon Jul 25, 2016 11:19 pm

I bale a lot at 18-23%. Heats a little in some cases, but seems to turn into great stuff. Might get the odd wad that is 30%+ and have a patch of mold. I bale them as tight as I can. Only time when it doesn't work for sure is with clovers. Guaranteed mold then.


Return to “Ranch Talk”

Who is online

Users browsing this forum: Google Adsense [Bot] and 10 guests