Ranchers.net Bull Session

Denny - Belarus 5460 - what's it worth?

A friendly place to talk about the weather, tell jokes and post cowboy poetry.
User avatar
Aaron
Member
Member
Posts: 625
Joined: Thu Feb 10, 2005 4:20 pm
Location: Stratton, Ontario

Denny - Belarus 5460 - what's it worth?

Postby Aaron » Sat Sep 05, 2015 7:17 pm

Going to look at one in the morning. 142 hours. Cab, Allied loader with bucket and forks. Always in a shed, pictures show immaculate condition. What were these worth new? It's a 2003 model. Asking $19800. I am aiming for $15k.

User avatar
Aaron
Member
Member
Posts: 625
Joined: Thu Feb 10, 2005 4:20 pm
Location: Stratton, Ontario

Re: Denny - Belarus 5460 - what's it worth?

Postby Aaron » Sat Sep 05, 2015 9:46 pm


Denny
Rancher
Rancher
Posts: 5608
Joined: Thu Feb 10, 2005 3:21 pm
Location: Mn usa

Re: Denny - Belarus 5460 - what's it worth?

Postby Denny » Sun Sep 06, 2015 7:47 am

I looked it up and the way I understand those are a Canadian model I've only ever seen one here and it was purchased in Canada and was at the exporter here heading to Egypt it was pretty nice it was a open station but very clean and a bit more modern than mine.

On the price I'm sure if you get it for $15,000 to $18,000 it should be worth that. My 825 cost me $16,000 with an allied loader on it with 750 hours but that's been 12 to 14 years ago.

The loader should be worth $6000 by it self don't you think.

I know of an 825 here no loader I can buy for $8500 low hours and well kept.
If your dreams don't scare you there not big enough!

User avatar
Aaron
Member
Member
Posts: 625
Joined: Thu Feb 10, 2005 4:20 pm
Location: Stratton, Ontario

Re: Denny - Belarus 5460 - what's it worth?

Postby Aaron » Sun Sep 06, 2015 2:53 pm

They wouldn't come down lower than 18k, so I am letting them sit on it with open offer of 15k. Only issue was a hydraulic leak somewhere above the transmission. All lights and levers worked perfectly. Would take a while to get used to the shift pattern as it is completely different from the old Belarus 400. Tires in near perfect shape. Could be a very handy spare loader unit, but not for more than 15k. Was not a fan of the blower motor for the cab, couldn't orientate fans to blow directly onto me. Is there an air-conditioning kit you can get for them? I am going to phone my Belarus dealer on Tuesday and pick his brain on this model.

Denny
Rancher
Rancher
Posts: 5608
Joined: Thu Feb 10, 2005 3:21 pm
Location: Mn usa

Re: Denny - Belarus 5460 - what's it worth?

Postby Denny » Sun Sep 06, 2015 4:27 pm

Image

This one cost me $10250.00 with the loader I did end up putting a clutch and new batteries in a year later total bill was $1200
If your dreams don't scare you there not big enough!

User avatar
Aaron
Member
Member
Posts: 625
Joined: Thu Feb 10, 2005 4:20 pm
Location: Stratton, Ontario

Re: Denny - Belarus 5460 - what's it worth?

Postby Aaron » Fri Sep 11, 2015 10:21 pm

Talked to the Belarus dealer today and he said it was worth 12-15k, so I guess I wasn't lowballing her. Only thing that ticks me off about the tractor is that they still put the fiber clutches in them, new. Have had so much more luck running steel clutches here.

User avatar
John SD
Rancher
Rancher
Posts: 1111
Joined: Wed Mar 16, 2005 11:28 am
Location: western SD

Re: Denny - Belarus 5460 - what's it worth?

Postby John SD » Sat Sep 12, 2015 7:50 am

Aaron wrote:Talked to the Belarus dealer today and he said it was worth 12-15k, so I guess I wasn't lowballing her. Only thing that ticks me off about the tractor is that they still put the fiber clutches in them, new. Have had so much more luck running steel clutches here.


Is there a good heavy duty aftermarket clutch available that would fit the Belarus application?

My neighbor has a 825. When the original starter went bad on it, IIRC he got a modified Delco starter which was the same starter used on the 6.2L GM diesels :idea:

User avatar
Aaron
Member
Member
Posts: 625
Joined: Thu Feb 10, 2005 4:20 pm
Location: Stratton, Ontario

Re: Denny - Belarus 5460 - what's it worth?

Postby Aaron » Sun Sep 13, 2015 12:13 am

Yeah, we gave up years ago on fiber clutches and went steel. This last one has lasted 7-8 years.

Doesn't really matter though. Lady sold the tractor. Guess there are still people out there that will pay any asking price.

User avatar
loomixguy
Rancher
Rancher
Posts: 6061
Joined: Mon Feb 12, 2007 7:10 pm
Location: The Dark Side

Re: Denny - Belarus 5460 - what's it worth?

Postby loomixguy » Sun Sep 13, 2015 3:41 pm

Might be the best thing ever happened to you. Things generally happen for a reason.
Arguing with a Kansas State fan is like playing chess with a pigeon.

No matter how good you are, the pigeon is just going to s*** on the chessboard and strut around like it won anyway.


Return to “Coffee Shop”

Who is online

Users browsing this forum: Google [Bot], Saddleup and 18 guests