Ranchers.net Bull Session

Chain saws

Things that come up in the daily operation of a ranch.
lavacarancher
Member
Member
Posts: 111
Joined: Tue Apr 08, 2008 12:32 pm
Location: Hallettsville, Tx

Chain saws

Postby lavacarancher » Sat Sep 23, 2017 5:20 pm

I guess most of us own at least one chain saw. I have two Stihl's, one about 30 YO and the other about 5 YO. Both saws were in the shop a few weeks ago because I couldn't get either one started. Was told it was bad gas (Ethanol). Used the new one time when I got it out of the shop and put it away - it hasn't started since even though it had Stihl ethanol free gas in it. The old one started on the second pull. The question I have for you is what do you do for your chain saws when you put them away? Run the gas out of the carb? Dump the gas in the tank? This is getting old and expensive ($8.00/liter). I'm probably like most of you and don't use the chain saws very often but when you need one ....

User avatar
BrangusUSA
Member
Member
Posts: 2
Joined: Thu Sep 21, 2017 4:32 pm

Re: Chain saws

Postby BrangusUSA » Sat Sep 23, 2017 5:41 pm

The guy that fixes our chainsaws and weedeaters, lawnmowers, etc. kept having to fix the chainsaws due to gas going bad over time. He had us switch to the gas that is already in the can and pre-mixed 50-1. He said it doesnt go bad like the other when it sits. We dont even put Stabil in it. Yes, it is more expensive. We buy it at Lowes.

Spanish Johhny
Member
Member
Posts: 69
Joined: Tue Jul 30, 2013 11:26 am
Location: where the deer and the antelope play AB CA

Re: Chain saws

Postby Spanish Johhny » Sat Sep 23, 2017 6:22 pm

I have 5. Two Stihl, a McCulloch, a Remington and an antique Mall. The one that gets the most use (the Stihl) is usually run at least once a week so the fuel doesn’t get a chance to get stale. I have started running premium gas in them and they seem to start better. I have an older Stihl and have converted it into a lumber mill. Never had problems starting it once I have the idiosyncrasies figured out. Now the rant; I have a newer Stihl which starts ok and runs great but it has the Easy2Start feature. I hate it. You pull the starter cord and that loads up a recoil which in turn turns the saw over. Supposed to be easier? So you give it a yank, wait a second or 2 and then the engine is spun and maybe you have a saw roaring to life at full throttle. Sorry Stihl, I can start my own saw, and I feel a little more in control (safe) starting it the conventional way. Please stop trying to improve things.

User avatar
Workinonit
Member
Member
Posts: 94
Joined: Tue Sep 26, 2006 6:49 pm
Location: Virginia

Re: Chain saws

Postby Workinonit » Sat Sep 23, 2017 6:53 pm

We have a Stihl, a Husquevarna and 20-some-odd-year-old Echo. When we know we aren't going to be using one for a while, we let the gas run out. We use the Stabil in the gas, and that seems to help. Whenever possible, we'll use Ethanol-free gas.

User avatar
m5farm
Member
Member
Posts: 161
Joined: Tue Jan 08, 2013 7:07 pm
Location: florida

Re: Chain saws

Postby m5farm » Sun Sep 24, 2017 4:51 am

I never try to crank em at least once every few weeks , got a jonsred and husky , I ran non ethanol when our store had it now I run what I got no issues yet but I do try and keep the dust knocked off.

lavacarancher
Member
Member
Posts: 111
Joined: Tue Apr 08, 2008 12:32 pm
Location: Hallettsville, Tx

Re: Chain saws

Postby lavacarancher » Sun Sep 24, 2017 6:29 am

BrangusUSA wrote:The guy that fixes our chainsaws and weedeaters, lawnmowers, etc. kept having to fix the chainsaws due to gas going bad over time. He had us switch to the gas that is already in the can and pre-mixed 50-1. He said it doesnt go bad like the other when it sits. We dont even put Stabil in it. Yes, it is more expensive. We buy it at Lowes.


Yes, that's the stuff I was talking about. That's what I use now but doesn't seem to help all that much. Maybe I should start them once or twice a month just to keep them limber. I don't like the "easy start" Stihl's either.

My fuel supplier won't carry the ethanol free gas for what ever reason but I notice several stations around the state are now carrying ethanol free gas. I may have to start buying it by the drum and pumping it into my overhead tank.

Denny
Rancher
Rancher
Posts: 5613
Joined: Thu Feb 10, 2005 3:21 pm
Location: Mn usa

Re: Chain saws

Postby Denny » Sun Sep 24, 2017 9:10 am

i run ethanol blend in mine always have no issues but we cut alot of wood here i've had 2 chain saws in 30 years a husky and now a jonserud mine are big saws higher cost large cc between the house and the shop we go thru 20 to 30 cord a winter
If your dreams don't scare you there not big enough!

User avatar
Silver
Rancher
Rancher
Posts: 5060
Joined: Wed Mar 23, 2005 9:51 pm
Location: BC

Re: Chain saws

Postby Silver » Sun Sep 24, 2017 9:36 am

I use a Husky Rancher these days, great saw as long as you never use the priming bulb. Might take a few extra pulls the first time you start it but I know it WILL start. Great saw, it goes everywhere the quad goes. In these parts you need a saw just to get down a fence line or a trail. Which is probably why the gas never gets a chance to get bad. I don't know if our bulk fuel has ethanol in it or not.

User avatar
4Diamond
Rancher
Rancher
Posts: 1039
Joined: Fri May 16, 2008 1:10 pm
Location: Missouri

Re: Chain saws

Postby 4Diamond » Sun Sep 24, 2017 1:59 pm

I bought a 562xp husky a couple years ago and I use the premixed can gas. My saw might sit 2-3 months at a time and will fire right up. I think the saw performs better on this fuel as well. Expensive yes but so is a saw that won't run.

User avatar
gcreekrch
Rancher
Rancher
Posts: 11286
Joined: Thu Feb 21, 2008 11:35 pm
Location: west chilcotin bc

Re: Chain saws

Postby gcreekrch » Sun Sep 24, 2017 6:05 pm

All Huskies here. I don't think any of the 3 sit a week without use.

Like any other motorized contraption, they all have pros and cons.
Don't tell people your problems, half of em' don't care and the other half are glad you got em' We can all run the neighbors better'n our own

User avatar
BrangusUSA
Member
Member
Posts: 2
Joined: Thu Sep 21, 2017 4:32 pm

Re: Chain saws

Postby BrangusUSA » Sun Sep 24, 2017 6:18 pm

Husqvarna, the large ones seem to crank easier than the small 14 inch one. Thought it was just me till the dealer said the same thing.

User avatar
Silver
Rancher
Rancher
Posts: 5060
Joined: Wed Mar 23, 2005 9:51 pm
Location: BC

Re: Chain saws

Postby Silver » Sun Sep 24, 2017 7:58 pm

BrangusUSA wrote:Husqvarna, the large ones seem to crank easier than the small 14 inch one. Thought it was just me till the dealer said the same thing.


Mine has a decompression button it, but never use it. Pulls reasonably well without it.


Return to “Ranch Talk”

Who is online

Users browsing this forum: Denny, OWE MONEY, Saddleup and 19 guests