If you are having problems logging in please use the Contact Us in the lower right hand corner of the forum page for assistance.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Ranchers.net
About at my wit's end with this line. It is main line coming off the pump and goes to remotes. NH tl100a. PO replaced it 4 yrs ago when original line started leaking. I developed a leak at the junction Sunday. I replaced the oring and then Monday it started again . closer inspection shows it has a hairline crack on line. I removed it and remembered the original was in the cabinet at the barn tried to find when it leaked at 4 yrs ago and couldn't find it. But the flange was brazed so I suspect he actually had it repaired, ( he was most likely drunk so he can't remember) I installed it and ran it 4 hrs baling yesterday and it started spewing again. After a little research there is a seal that goes in along with Oring . and of course dealer does not have it in stock. I replaced oring today again and was able to get finished.