Search results for query: *

I have to agree with wdcook something is wrong? How many hours do you have on this tractor? We do not have a 6400 but this series should start down to 10 degrees, I would start with the battery's, cables, and starter, if still starting hard would pull the injectors to check they are holding...

You can replace all the bearings in those rollers that are in that cradle, looks harder than is really is! Take the pressure off the belts, take the small chains off the sides that stop that cradle and the big chain off the side so you can spin the rollers by hand, rock that cradle so the holes...

ACS, Correction it's 1800 rpm at 70 mph not 18000 :oops: Good luck 101

I have the 5.3 in mine, I think it is like the older 327 very quick with the rpm's but lacks in torque, runs down the road very well with light loads, but lacks the torque when pulling a trailer with a load!! I get a solid 22 mpg doing 70mph but drops in mpg from there, When going 70 mph the...

ACS I have a 04 Chev Siverado 1500, 4x4, auto. trans., extended cab short box with the small V8 and love it, You will love the ride of the newer chevy's, and if it's a 4x4 will go just about any where you will want to go, If you want to haul something 8' tho you will need to leave the tail gate...

I think you should be able to find parts for those Ford Industrial engine's, I had an older Vers. model 400 and used to get most parts fot the engine from NAPA here in SD, there sure was a lot of them made and I think some Ford pickups used the same parts. Good luck 101