JD 7000 planter

Any topic that doesn't fit in one of the other Boards.
Post Reply
Posts: 715
Joined: Fri Feb 11, 2005 12:57 pm
Been thanked: 6 times

JD 7000 planter

Post by Haytrucker » Mon May 07, 2012 9:14 pm

I probably could have snuck this in elsewhere, but my question is, has anyone had any experience modifying or retrofitting the transmission gears on one of these? With modern seed sizes my summer employer is pulling his hair out planting less than 4.3 mph, or over 6. It seems that there could be a happy medium, but we have yet to find it.
He only plants 180 acres of irrigated corn per year, and is a little picky about the process. Replacing the 'ol girl with an air planter isn't an option we're looking at, although I believe that to be the solution. He is probably right about the seed singulation factor.


Post by Waterway64 » Mon May 07, 2012 9:42 pm

I am not sure its a transmission matter. If I correctly remember the operaters manual on the one I had, there was a strongly recomended ground speed do th the seed meter itself so that it would plant properly. I believe going faster will cause more skips. Mel

Posts: 5632
Joined: Thu Feb 10, 2005 3:21 pm
Location: Mn usa
Has thanked: 1 time

Post by Denny » Wed Sep 05, 2012 6:36 am

Faster is'nt always better. Take it easy and do a good job it only add's a day to your planting project if that.

User avatar
3 M L & C
Posts: 1183
Joined: Mon Nov 08, 2010 8:17 pm
Location: Kansas

Post by 3 M L & C » Wed Sep 05, 2012 6:33 pm

4.3 is plenty fast enough to plant corn. We plant everything at 4.2. Don't ask why its not 4.3 or 4.1, I don't know. :D The people that raise record crops, regarless of what kind it is usually plant between 3 to 3.5 mph. Slower speed equals more equal stand, more equal plant growth, ear size, everything regardless of planter type. Don't know anything about the singulators, but I do know a vacume planter is really nice. :)

Post Reply