Trinity man
Well-known member
What king of Solar water pumps do any of you use? Our Artesian well has about quit flowing so I am in need of a pump.
RSL said:Depends on depth and flow rate needed.
The lorentz are really good in high lift/volume applications. If you need lift and not a lot of volume look at a shur-flo 9300. If you don't have a ton of lift, and need a lot of volume, look for an M20 or M30. If the lift is around 10' or so, just buy a bilge pump for a boat.
There are a ton of options, so a bit about lift, volume, what you are pumping out of and into is useful...
George said:Are you sure you need that much lift?
You can put a pipe down as deep as you want but the lift you need is only from the top of the water level to where you need to go. If you are able to use the atteasian weel you have that has gotten low while it might be 200' deep you might only need 20' to 30' of lift to get the flow you need.
Just a thought that might save you a bunch of money.